Need help?Do you have a question about the Comica CVM-AX1 and is the answer not in the manual?
Guide on attaching the cold shoe mount and securing the audio mixer onto a camera.
Steps to connect the mixer's audio output jack to the camera's audio input jack.
Instructions for attaching microphones to the cold-shoe interfaces of the audio mixer.
How to connect the microphones to the appropriate input jacks on the audio mixer.
Configuring the LINE/MIC/3V switch based on input source type (LINE, MIC, 3V).
Setting the Mono/Stereo switch and adjusting gain-control knobs for optimal audio.
Instructions for powering on the device and monitoring audio via headphones.
General| Type | Audio Mixer |
|---|---|
| Channels | 2 |
| Gain Control | Yes |
| Phantom Power | 48V |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | > 85dB |
| Input Connectors | 3.5mm TRS |
| Output Connectors | 3.5mm TRS |
| Monitoring | Headphone output |
To Next Page
