Need help?Do you have a question about the Comica LINKFLEX-AD1 and is the answer not in the manual?
Crucial product notices, compatibility, and safety guidelines for users.
Instructions on preparing the device before initial operation.
Guides setting the switch to camera mode and the resulting indicator light.
Details connecting the device to a camera via the 3.5mm jack.
Guides setting the switch to smartphone mode and the resulting indicator light.
Details connecting the device to a smartphone for recording.
Explains the function of the gain control wheel for adjusting sensitivity.
Describes the monitoring jack for listening to the recording status.
Details the power switch operation and low battery indicator.
General| Output | 3 pin XLR interface |
|---|---|
| Input | 3.5mm connector |
| Gain Range | Maximum increase -10dB |
| Frequency Range | 20Hz - 20kHz ±1dB |
| Distortion + Noise | <0.02%, RL=2kΩ, f=20~20KHz, Vo=0.7Vrms |
| Battery | CR2032 3V |
| Working Temperature | 0℃ ~ +50℃ |
| Storage Temperature | -20℃ ~ +60℃ |
To Next Page