Notice
Don't block the antenna positions of the TX and RX during
use to avoid aecting the wireless distance
TX Antenna Position
RX Antenna Position
2
When it needs to be used for a long time, it can be connected to the external power to realize charging while
using. AC/DC power is not supported to avoid noise problem
In wireless mode, for a better recording eect, please adjust the gain of the transmitter first. After the transmitter
is adjusted to the maximum gain level, then adjust the gain of the receiver accordingly
The device is a high-precision instrument. Please avoid falling, collision, or pounding
Do not use this equipment in the vicinity of heat sources or interference sources, such as radiators, ovens,
refrigerators, or air conditioners
If the pick-up distance is close or when used outdoors, please put on the wind mu to prevent sound bursts or
reduce wind noise
Do not use the equipment in the rain or in a damp environment to avoid short-circuit danger
Please use it face-to-face, and don’t turn
your back to the receiver. Otherwise, it is
easy to generate breakpoints
To Next Page
Loading...
