EasyManua.ls Logo

COMINOX STERILCLAVE 18 S Dynamica - User Manual

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
-Steam Steriliser-
FOREWORD
This manual IS NOT an integral part of the steriliser.
The manual is addressed to qualified, specialised technicians for routine maintenance
and repairs.
Technicians or operators mused be authorised in writing by COMINOX.
Technicians must read this manual and follow the instructions herein contained. COMINOX
is not liable for any injury and/or damage to people or property or to the steriliser itself
should the conditions herein illustrated be disregarded.
This manual contains industrial secrets which must not be disclosed. The manual and its
annexes must not be edited, modified, copied or given to third parties unless authorised
by COMINOX.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the COMINOX STERILCLAVE 18 S Dynamica and is the answer not in the manual?

Summary

Technician Menu Operations

Input Status Display

View and monitor the status of steriliser inputs.

Board Calibration Procedures

Calibrate temperature and pressure sensor boards.

Probe Calibration and Correction

Calibrate temperature probes and adjust readings.

Alarm Conditions and Troubleshooting

Water and Chamber Alarms

Alarms related to water levels, quality, and chamber filling.

Steam, Pressure, and Vacuum Alarms

Alerts for steam leaks, pressure, and vacuum issues.

Temperature and Probe Alarms

Signals over/undertemperature, probe faults, and alignment errors.

Speedy Water Demineralization System Installation

Firmware Upgrade

Diagrams and Wiring Schematics

Wiring and Hydraulic Diagrams

Schematics for electrical and fluid systems.

COMINOX STERILCLAVE 18 S Dynamica Specifications

General IconGeneral
Chamber Volume18 liters
Power Supply230 V / 50-60 Hz
Control SystemMicroprocessor controlled
Temperature Range121°C to 134°C
Pressure Range1.1 to 2.1 bar
Heating SystemElectric
DisplayLCD
Cycle Time30-60 minutes depending on program
ProgramsMultiple pre-set programs
Sterilization MethodSaturated Steam
MaterialStainless Steel
Safety FeaturesAutomatic door lock, pressure safety valve

Related product manuals