Subject to change
COMM-TEC GMBH SIEMENSSTRASSE 14 TEL: +49 7161-3000-0 WWW.COMM-TEC.DE
D-73066 UHINGEN FAX: +49 7161-3000-400
5. Basic Function
- By pressing the ShowMe Button at the Transceiver the connected source will be switched on the bus.
If you use the Ring-type connection the video signal will be shown at all HDMI outputs.
6. Detailed information
- In the manual you will find detailed information about
o Web GUI
o Auto switching
o EDID Management
o HDCP
o Ring-type or Chain-type Connection
o Grouping
o control options
o and more
To Previous Page
