Fig 2.1.3 Gateway mode 2G Wi-Fi Setting of AirONE APO300
Note: The device will restart for the changes to take effect for mode changes to Gateway
mode.
2.2 Super WDS Mode
In Super WDS mode, Scan Repeater SSID whose password is known and configure WDS
setting. Then configure the wireless parameters as per your choice of SSID, Channel
width, Encryption and Time reboot if required.
Note: Just in case if you don’t have any RJ 45 cable running to site then in Super WDS
mode you have to just power on the device and wirelessly can connect to clients as well
as any SSID (BSSID). No need of connecting physically LAN as well as WAN port.
To Next Page
Loading...