Need help?Do you have a question about the Commando AirONE Series and is the answer not in the manual?
Key hardware specifications including memory, ports, and architecture.
Describes the physical Ethernet ports and their capabilities.
Information on the device's durability and extended operation.
Details on quiet operation for sensitive environments.
Connect and configure the device via a wired LAN connection.
Connect and configure the device via wireless network.
Displays current CPU and Memory usage percentage of the APO.
Details about LAN and WAN connection status and configuration.
Information on Wi-Fi status, clients, SSID, channel, and encryption.
Lists connected clients, their MAC addresses, signal strength, and connection time.
Explains how to configure the device's operational mode.
Monitors upstream and downstream bandwidth usage for Wi-Fi.
Configuration steps for Gateway Mode setup.
Configuration steps for Super WDS Mode setup.
Configuration steps for WISP Mode setup.
Configuration steps for Repeater Mode setup.
Configuration steps for AP Mode setup.
Configure multi SSID, VAPs, and enable/disable specific SSIDs.
Allow or prohibit clients based on MAC address.
Schedule Wi-Fi ON/OFF times.
Enable Wi-Fi Timer Off to turn off SSID at specified times.
Configure Country Region, 2G/5G Mode, Multicast Fast, etc.
Configure LAN IP, Subnet, STP, and DHCP Server.
Set up VLANs for different networks using Multi SSID.
Set WAN connect method, MTU, and DNS manually.
Configure web server access, MAC clone, VPN pass-through.
Protocol to build a loop-free logical topology and prevent loops.
Configure VLANs using multi SSID for different networks.
Assign static IP addresses with MAC bindings.
Set WAN connect method, MTU, and DNS manually.
Configure web server access, MAC clone, VPN pass-through.
Configure cloud server URL and binding code.
Configure URL mapping for portal installation and redirect URLs.
Restrict web content by creating policies for allowing or blocking sites.
Filter IP addresses to control access to the APO SSID.
Filter MAC addresses to control access to the APO SSID.
Filter IP addresses to control access to the APO SSID.
Filter MAC addresses to control access to the APO SSID.
Monitor traffic, permit/block packets based on security rules.
Configure DMZ Host IP to add an extra layer of security.
Backup, restore configurations, reset defaults, enable/disable Telnet.
Schedule automatic reboots of the AP.
Change the admin password for device login.
Upgrade the APO for new functions and better performance.
Schedule automatic reboot of the AP.
Create or change the admin password for device login.
Upgrade the APO for enhanced functions and performance.
Configure system time, time zone, and NTP settings.
Record APO information, track, alert, and analyze issues.
Optimize bandwidth and improve network experience for applications.
Define IP groups and associated IP addresses for wireless users.
Create Time Groups for specific activities with time ranges and frequencies.
Set up DDNS for a fixed domain name mapping to the latest IP address.
General| Frequency Band | 2.4 GHz, 5 GHz |
|---|---|
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Antenna Type | Internal |
| Ethernet Ports | 1 x 1Gbps Ethernet Port |
| Power Supply | 12V DC |
| Humidity | 5% to 95% non-condensing |
| Dimensions | 180mm x 180mm x 40mm |
To Next Page