NETWORK
LAN Settings:
It can set Lan IP (Access IP), Subnet and STP along with DHCP Server, Start and
maximum DHCP address, DHCP Lease Time and client list along with utilized IP count.
VLAN Settings:
Multi SSID can be provided with different VLAN ID to set different network with separate
broadcast domain.
Static DHCP:
The DHCP Static IP Mapping feature enables assignment of static IP addresses with MAC
address without taking IP addresses from DHCP pool with manual bindings.
WAN Settings:
You can set WAN Connect Method, MTU and DNS Manually along with Primary,
Secondary DNS.
WAN Advanced Settings:
It can Enable Web server access on WAN ports from 1 to 65535. It can set MAC Clone,
Enable or disable Ping Access on WAN. Enable or disable IPsec, PPTP, L2TP pass
through on VPN connection.
Cloud Server Settings: You can set Cloud server URL along with binding code.
URL Mapping:
URL mappings work for the new Portal installation. URL mapping redirection to particular
Website.
Note: All italic config options are only available in WISP and Gateway mode only
4.1 LAN Settings
IN LAN Setting you can set access IP for APO along with subnet. You can enable STP to
avoid loops in network and preventing broadcast storms. You can set DHCP Server which
acts as a network server that automatically provides and assigns IP addresses, default
gateways and other network parameters to client devices. It relies on the standard
protocol known as Dynamic Host Configuration Protocol or DHCP to respond to
broadcast queries by clients.
To Next Page
Loading...