How to use
Setting the Pin-number
Please set the pin number
while you open the door.
Open the battery cover,
Push the registration button once
then you can hear “Beep” sound
Lift up the cover of keypad and
check the lights on in the keypad.
Set the pin number 4 to 12 digits.
Set the pin number 4 to 12 digits.
button than the registration Push the
Go to outside
Outside
Outside
Warning!
Warning!
Note
If you add the other pin-number, you repeat ③, ④ until turn off the
lights on keypad. (Pin number can be registered up to 4 pin numbers.
The registration will be canceled when you do not push any numbers
for 10 seconds after push the registration button. If you register new
pin-numbers, old one will be deleted automatically.
To Next Page
Loading...
Need help?
General
