5
[Communication with the door station]
1. When a visitor press the calling button, both handset Master and Slave ring.
(Volume can be adjusted by the switch on the side of handset: only DP-LA01M)
2. Pick up one handset between Master and Slave and start the communication.
3. Check the visitor first and push the door open button to open the door.
[Communication between handset : DP-LA01M
DP-LA01S) ]
1.
Pick up the handset to call another handset. (The handset will be called while the button
isbeing pushed.)
2. When other party gets the phone, the conversation begins.
3. If a visitor presses the call button while the handset is being used, the handset will ring
4.
Hang up the phone to finish the conversation between handsets and pick it up again to
begin the conversation with the visitor.
(If you pick up the handset, it will be connected to the door unit automatically.)
4.
Operation
To Next Page
Loading...
Need help?
General
