EasyManuals Logo

Commercial Electric HPSA11CWB User Manual

Commercial Electric HPSA11CWB
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Safety Information
-2-
WARNING:
• Not compatible with standard 3-way or 4-way. Do not exceed
the load power rating limit of the device. Maximum total wattage
rating: Up to 300 total watts for LED and CFL; 600W/120V for
Incandescent/Halogen.
For indoor use only. Do not use in wet location.
• This product is to be installed or used in accordance with
electrical codes and regulations. If you are unsure of any part
of the instructions, consult an electrician.
• Save this instruction sheet. It contains important technical
data along with testing and troubleshooting information which
will be useful after installation is complete.
• Do not disassemble the product or make repairs yourself. You
run the risk of electric shock and voiding the limited warranty.
If you need service, or If you need assistance, please contact
Customer Service.
TO REDUCE THE RISK OF OVERHEATING AND POSSIBLE DAMAGE
TO OTHER EQUIPMENT, DO NOT INSTALL TO CONTROL A RECEPTACLE,
A MOTOR OPERATED APPLIANCE, A FLUORESCENT LIGHTING FIXTURE,
OR A TRANSFORMER-SUPPLIED APPLIANCE.
CAUTION:
NOTE:
Make sure to use this product together with 15A circuit
breaker in the upstream.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Commercial Electric HPSA11CWB and is the answer not in the manual?

Commercial Electric HPSA11CWB Specifications

General IconGeneral
BrandCommercial Electric
ModelHPSA11CWB
CategorySwitch
LanguageEnglish

Related product manuals