Commodore 1581 - Chapter 1: Unpacking, Setting Up and Using the 1581; Step-by-Step Instructions

1581 SOFT ERROR TEST
VERSION 1.5.1
SOFT ERROR TEST OPTION THREE ~- PRELIMINARY TEST
PRELIMINARY SOFT ERROR TEST OPTION MENU
Press RETURN —- Start Test >> 2 Pass
Press (A) - Alter Passes >> 2 Pass
Press (0) - Read Test Results
Press (X) - Return to Menu
Displays Soft Error Test Main Menu
+e
+
PRELIMINARY SOFT ERROR TEST OPTION ONE - START TEST 2 PASS
This option is used for Preliminary Soft Error Testing. At the end of the
designated number of passes, displayed next to Alter Pass Option, the test
will terminate and the drive will reset. Test Results are stored on the
Test Diskette and read at test end using Option Three. (Read Test Results)
* If the drive passes this Preliminary Test, the 50 Pass Soft Error Test
(Soft Error Test Option One) should be run.
taewmwewow
WHEN DOWNLOADING IS COMPLETE AND THE SOFT ERROR TEST OPTION MENU
IS DISPLAYED, THE TEST WILL RUN INTERNAL TO THE DRIVE AND THE
C128/C128D NEED NO LONGER BE CONNECTED UNTIL THE TEST IS
COMPLETE AND THE TEST RESULTS ARE READ.
+ -
PRELIMINARY SOFT ERROR TEST OPTION TWO - ALTER PASSES
This option is used to set the Number of Passes the Soft Error Test is
to execute.
* Current Number of Passes is displayed next to option
PRELIMINARY SOFT ERROR TEST OPTION THREE - READ TEST RESULTS
This option is used to read and display Soft Error Test Results once the
designated number of passes are complete,
* Complete Error Reporting as well as Pass/Fail Status is displayed.
* Refer to Soft Error Test Result Summary -- Pages 1-9 thru l-11
SOFT ERROR TEST OPTION FOUR ~ MODIFIED TESTS
* Press (C) - Create Custom Error Test
* Press (B) - Blink LED at Test End
* Press RETURN - Return to Menu
Displays Soft Error Test Main Menu
Page l~-7