Commodore 1581 - How to Prepare a New Diskette

1581 ALIGNMENT/REPAIR TEST
VERSION 1.5.1
DESIGNED TO TEST : 1581 SINGLE DISK DRIVE
REQUIRED EQUIPMENT: C128 OR C128D COMPUTER
1581 SINGLE DISK DRIVE
DUAL TRACE SCOPE
VOLT METER (OPTIONAL)
40 COLUMN MONITOR OR TV SET
135 TPI ALIGNMENT DISKETTE (P/N 314854-03)
VERSION 1.5 DIAGNOSTIC DISKETTE
ALIGNMENT REPAIR TEST OPTION MENU
Press (0) - Select Device Number >> [8] or [9]
Press (1) - Drive Alignment
Press (2) - Zero Track Test/Adjust
Press (3) - Stepper Motor Slew
Press (4) - Drive Motor Logic
Press (5) - Side Select Logic
Press (6) - Load Diagnostic Menu
+eee
+
Oe
H
ALIGNMENT REPAIR TEST OPTION ONE - SELECT DEVICE NUMBER
This option allows the Alignment/Repair Test to be run on a System
set to either Device Number [8] or [9]
ALIGNMENT REPAIR TEST OPTION TWO - DRIVE ALIGNMENT
* Press (S) - Display Scope Settings
* Press (D) - Dis-Assembly and Setup
* Press (A) - Begin Drive Alignment
* Press RETURN - Return to Menu
Displays Alignment/Repair Test Main Menu
Page 1-14