Commodore Amiga - Page 135

you modify the Pointer colors then want to get back the last colors that were
saved, select the ResetColor Gadget.
Changing the Pointer
To mOdify the Pointer, select one of the colors or transparent, point to a
place in the magnified view where you want a pixel of that color, then click
the Selection button. If you want to start from scratch, select Clear to make
all the pixels transparent. (If, after you make changes, you'd rather have
the old Pointer back, select Restore.)
Changing the Point
Every Pointer has a single pixel called the point. To point to something on
the display, position the Pointer so that this pixel is over it.
In the magnified view of the Pointer, the point is indicated by a smaller
square within one of the pixels . To change the Pointer's point, select Set
Point, . point to the pixel in the magnified view you want as the point, then
click the Selection button.
When you're done and are happy with the Pointer you've created, select
OK. To get back to the main Preferences screen without changing the
previous Pointer, select Cancel.
A-26
Appendices