Commodore Amiga - Page 154

multitasking 4-14
Notepad A-4
introduction to 3-18
NTSC connector 2-9
on televisions 2-7
NTSC monitors
connecting 2-9
text size on 7-4
On/Off switch 3-3
Open 3-18
opening disks 3-13
opening projects 4-14
opening tools 3-18, 4-14
by double-clicking the Selection button 3-20
operating temperature 6-2
operations involving disks 4-30
options, menu 4-10
Paper Size (printer setting) 7-7
Paper Type (printer setting) 7-7
parallel connector
pin assignments for 7-13
pin assignments for connectors 7-10
Pitch (printer setting) 7-7
pixels
number of in screens 4-3
Plug 'n Print Cartridge 5-3
plugging in the Amiga 2-13
point (of the Pointer) A-26
Pointer
changing A-25
changing Pointer speed 7-3
editing A-25
moving 3-7, 4-5
moving without a mouse 3-8
point of 4-5
Wait Pointer 4-6
pointing 3-7, 4-5
ports See connectors
power cord
lllustration of 2-2
power, requirements for 7 -19
precautions See warnings
precautions for add-ons 5-2
Preferences 7-2
changing the Pointer with A-25
getting back settings 7- 10
introduction to 3-17
saving settings 7-10
settings for 7-2
using settings 7-10
preparing disks for use 4-30
Printer Graphics Screen 7-8
printers
adding 7-6
attaching 7-6
ins tailing 7 - 6
list
of supported printers 5-3
Preferences settings for 7-6
properties of 3-18
specifying parallel or serial 7-7
projects
creating 3-18
discarding 4-1 5
duplicating
4-14
getting Information about 4-15
moving 4-16
moving to a new disk 4-32
opening 4-14
renaming 4-15
reopening a project 3-21
saving 3-21
protect tabs 3-2
protecting disks 3-2
pushing windows to the back 4-21
pushing screens to the back 4-28
putting together the Amiga 2-1
Quality (printer setting) 7-7
radio and television interference 5-2
RAM
adding RAM to the Amiga 5-2
meter for available RAM 4-28
random-access memory See RAM
RGB monitor
attaching 2-8
Index 1-5