Commodore PC - Compare

Debug 2151
n
Compare (C)ompare
r^) Purpose:
Compares the portion of memory specified by range to a portion
/t~^ of the same size beginning at the specified address.
Syntax:
^. Orange address
Comments:
Mm^ If the two areas of memory are identical, there is no display, and
' i debug returns with the ms-dos prompt. If there are differences,
they are displayed in this format:
(~*\ addressl bytel byte2 address2
n
n
Example:
The following commands have the same effect: Using the Compare
command
_ C100JFF 300
or
C100L100 300
n
Each command compares the block of memory from 100 to 1FFH
with the block of memory from 300 to 3FFH.
n
n