Commodore Plus 4 - Multi-color graphics

2 The Built-in Software
This chapter explains all the commands for each built-in program. Separate
sections cover the commands for the word processor, the spreadsheet, and the file
manager. In addition, the instructions for formatting printed output are
explained in a separate section of the chapter. Some commands can be used in
more than one program. Next to each command is one or more abbreviations
that indicate which programs accept the command. The abbreviations used are
WP (word processor), SS (spreadsheet), and FM (file manager).
Note: Text that would be displayed in reverse mode on your screen is shown
boxed in this book.
Switching Between the Programs
When you first turn on the built-in software by pressing function key Fl and the
RETURN key, the word processor comes up automatically* To switch to one of
the other built-in programs, you must enter command mode and issue one of the
following commands:
Command
tw
tf
tc
gr
Destination
word processor
file manager
spreadsheet
graph generator (accessed through the spreadsheet only)
Command Mode
Many commands in each of the built-in programs are issued in command mode,
which means you must enter command mode before you can issue the command.
To enter command mode, press the Kg and C keys together. The status line
98