MVP28
TWO-WAY MONITOR LOUDSPEAKER WITH 90° X 40° HF HORN
COMMUNITY PROFESSIONAL LOUDSPEAKERS
333 East 5th Street, Chester, PA USA 19013-4511 TEL (610) 876-3400 FAX (610) 874-0190
www.loudspeakers.net
MVP28 [09-27-01]
Specifications subject to change without notice.
MVP28 Page 1 of 2
DESCRIPTION
Loudspeaker Type: Two-way, full-range
Operating Range: 70 Hz - 16 kHz
80 Hz - 14 kHz (+/-5.5dB)
Max Input Ratings: 150W continuous, 375W Program
35 volts RMS, 77 volts momentary peak
Recommended Power Amplifier:
For maximum SPL: 300W to 450W @ 8 Ohms
Sensitivity 1W/1m:
94 dB SPL (80 Hz - 12.5 kHz 1/3 octave bands)
94 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 116 dB SPL / 123 dB SPL (peak)
Nominal Impedance: 8 Ohms
Min Impedance: 3.8 Ohms @ 10660 Hz
Nominal -6dB Beamwidth:
90° H (+-4° / -42°, 2 kHz - 12.5 kHz)
40° V (+17° / -16°, 2 kHz - 12.5 kHz)
Axial Q / DI: 19.9 / 13, 2 kHz - 12.5 kHz
Crossover Frequency: 2 kHz
Recommended Signal Processing: 70Hz high pass filter
Drivers: LF (1) 12"
HF (1) LM20™ compression driver,
non-metallic diaphragm, Ferrofluid-cooled
Driver Protection: Thermal Link™
Input Connection: (2) 1/4” jacks, (2) LockingConnectors
Controls: None
Enclosure: MDF
Enclosure Hardware: (2) Recessed handles
(6) Interlocking corner protectors
(4) Rubber feet
Mounting / Rigging Provisions: None
Grille: 16 gauge perforated steel
Required Accessories: None
Supplied Accessories: None
Optional Accessories: None
Dimensions: Height: 20.4 in. / 518 mm
Width: 14.5 in. / 368 mm
Depth: 13.8 in. / 351 mm
Front slope: 35º from horizontal
Weight: 30 lb. / 13.6 kg
Shipping Weight: 34 lb. / 15.4 kg
1. Sensitivity: Free field pink noise measurement at 40 ft / 12.2 m at 50%
power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nom-
inal impedance.
The MVP28 is a high output, super-compact, two-way stage monitor
system. The system utilizes one LM20™ proprietary high-frequency
compression driver coupled to an exponential horn and one 12" woofer
for high sensitivity and excellent power handling capability. These com-
ponents are matched to an extremely low-profile enclosure of an opti-
mally tuned, direct radiating, bass reflex design. The recessed handles,
black carpet exterior, perforated steel grille, and injection molded cor-
ners make this system attractive, rugged and easily transportable.
The MVP28 offers a robust internal crossover with Thermal Link™
Dynamic HF Driver Protection. The crossover is built to last with high
quality inductors, precision wound coils and military grade circuit
boards. The proprietary Thermal Link™ Dynamic HF Driver Protection
circuit provides both over-current and thermal protection for added per-
formance and reliability
Designed as a high performance stage monitor, the MVP28 offers the
clarity and detail necessary for critical live performance use. In addition,
its smooth, peak-free response provides maximum gain before feedback
ensuring capability for high on-stage sound pressure levels. The com-
pact, low-profile design makes the MVP28 ideal for TV broadcast,
house of worship and other applications where stage equipment must be
as unobtrusive as possible, yet provide fully professional performance.
APPLICATIONS:
·
SOUND REINFORCEMENT/P
ORTABLE
PA
·
CLUBS/DJ
·
BANDS
·
HOUSES OF WORSHIP
·
P
ERMANENT INSTALLATION
·
S
PORT FACILITIES
& HEALTH
CLUBS
·
RENTAL SYSTEMS
·
KARAOKE
FEATURES:
·
S
IGNAL PRESENT LED
·
THERMAL LINK™ HF DRIVER PROTECTION
·
LM20™ LOW MASS FERROFLUID-COOLED NON-METALLIC DIAPHRAGM
·
H
EAVILY BRACED MDF CONSTRUCTION
·
T
WO ¼" INPUT
CONNECTORS,
AND TWO LOCKING CONNECTORS
·
RECESSED HANDLES
·
16 GAUGE STEEL GRILLES
SPECIFICATIONS (See notes 1 and 2)
To Next Page
Need help?
General
