Compact Home Lifts Elegance Plus Series User Manual

Compression Load
330kg / 3250 N Optional Non-penetrating
Fixingss to Ground Floor
No Load Bearing on 1st Floor
Fixings used to Maintain Rail Gauge
2x Bugle Screw
Guide Fixing
Technical Information:
MAX Capacity 220kg / 2-3 Persons
CAPACITY:
TRAVEL:
NO of FLOORS:
240v 1PH 50HZ
SUPPLY VOLTAGE:
RUNNING CURRENT:
3.2 AMP
STARTING CURRENT:
4.0 AMP
STANDARD COLOUR:
Rope Drum, Braked Gear Motor Drive
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus Single & Thru Car
DRIVE SYSTEM:
Elegance Plus
Agate Grey - RAL 7038
Minimal
Load on Ceiling
Possible Lateral Load of 8kg
2 Fixed Pins in Shear with Ceiling
Up to
4500mm
Up to 3 with split level
(Thru Car)
© Elegance PLUS
Lift Installation
Compact Lifts
3

Compact Home Lifts Elegance Plus Series Specifications

General

Drive Type	Hydraulic
Maximum Travel	12 meters
Maximum Load	400 kg
Rated Speed	0.15 m/s
Pit Depth	150 mm
Travel Height	Up to 12 meters
Number of Stops	Up to 6 stops
Drive System	Hydraulic
Control System	Microprocessor Control
Door Type	Automatic sliding

Summary

Elegance Plus Lift Technical Specifications

Drive System

Specifies the lift's drive system as Rope Drum, Braked Gear Motor Drive.

Capacity

Details the maximum load capacity and passenger count.

Travel

Indicates the maximum vertical travel distance of the lift.

Number of Floors

Supply Voltage

Details the required electrical supply for the lift operation.

Running Current

Starting Current

Elegance Plus Lift Dimensions

Maximum Travel

Defines the maximum vertical travel distance the lift can cover.

Minimum 1st Floor Ceiling Height

Specifies the required minimum ceiling height at the first floor.

Lift Inner Height

Indicates the usable vertical space inside the lift cabin.

Door Height

Defines the clear opening height of the lift door.

Elegance Plus Floor Insert & Shaft Lid Assembly

Elegance Floor Insert Cutout Specifications

Guide Rail Gauge

Specifies the required width for the guide rails.

Cutout for Floor Insert Body

Elegance Plus Shaft Installation Requirements

Shaft Preparation

Wall Thickness

Minimum Door Width