2-4
Forming a Partnership
Writer: Shelly Ficalora Saved by: Rebecca Wiggins Saved date: 01/08/98 11:23 AM
Part Number: 266667-001 File name: 06Ch02.doc
Step 4: Connect the Handheld PC
to the Computer
Once Windows CE Services is installed on your computer and the
communications port is configured, you are ready to connect your
handheld PC to the computer. To do so, follow the steps below.
CAUTION:
Route cords and cables so that they will not be walked
on, tripped over, or pinched by items placed upon or against them.
Pay particular attention to the power plug, electrical outlet, and the
point where cords and cables exit the device.
1. Connect the 16-pin end of the auto-sync cable to the serial
connector on your handheld PC
1
.
2. Connect the 9-pin end of the auto-sync cable to the serial
connector on your computer
2
. (Some computers may require
a 9-to-25 pin adapter in order to connect the auto-sync cable).
Connecting the Handheld PC to a Computer
NOTE:
The first time you connect your handheld PC to the
computer, the New Partnership Wizard appears on the screen.
Follow the instructions to establish a connection between the two
devices. The next time you connect, your data will be
synchronized automatically, provided that you accept the default
settings.
IMPORTANT:
Refer to The Handheld PC Companion for more
information on establishing a connection and synchronizing data.
To Next Page
Loading...
