Using the Modem
5-3
Writer: Shelly Ficalora Saved by: Rebecca Wiggins Saved date: 01/07/98 4:29 PM
Part Number: 266667-001 File name: 09Ch05.doc
Connecting the Modem
To connect the built-in modem, follow these steps:
1. Lift up the modem jack cover (indicated by a telephone
icon)
1
.
2. Plug one end of the modem cable that came with your
handheld PC into the modem jack
2
.
3. Plug the other end of the modem cable into the analog
telephone jack
3
.
Connecting the Modem
4.
Establish a dial-up connection through the Remote
Networking application. (Select
Start→Programs→
Communications→Remote Networking.)
NOTE:
For information on the software and COM port settings
needed to create a dial-up connection, refer to the Windows CE
Services Help that you installed on your computer.
For problems making a dial-up connection, see “Modem
Problems” in Chapter 10, or see the troubleshooting section of
The Handheld PC Companion.
To Next Page
Loading...
