Installing a System into a Cabinet 3
Check the contents of the accessories box against the list in Table 1–1.
Table 1–1 Accessories List
Part Number Quantity
Accessories for Mounting
Front bezel assembly 70-40129-01 1
Ball bearing slides 12-49881-01 1 set
Cable management arm 70-40177-01 1
Pivot rod stabilizer bracket 74-48996-01 1
Actuator latch 74-60579-01 1
Poly bag with mounting hardware
(see below)
1
Mounting Hardware
Slide brackets 74-53563-01 4
Front mounting brackets 74-53924-01 2
10-32, 5-hole nut bar 74-51531-01 2
10-32, 8-hole nut bar 74-46418-01 2
M4, 2-hole nut bar 74-60633-01 4
M4, 2-hole, 2 perforations, nut bar 74-60632-01 4
10-32 x 0.5 hex head screws 90-00061-44 16
10-32 U-nuts 90-07786-00 2
M4 x 10 mm socket button head cap screw N/A 26
M3 x 10 mm pan head Phillips screw 90-09984-21 2
Plastic cable clamp N/A 1
To Next Page
Loading...
Need help?
General
