Installing a System into a Cabinet 1
Chapter 1
Installing a System into a Cabinet
This chapter gives procedures for installing an AlphaServer ES40 rackmount
system into a cabinet.
WARNING: The system is very heavy. Do not attempt to lift it
manually. Use a material lift or other mechanical device to lift
the system. At least two people are required to perform the
installation.
You need the following tools for the installation:
#2 Phillips screwdriver
5/16-inch hex socket
Extension bar for socket
5/64-inch Allen head wrench
2.5 mm Allen head wrench
Material lift or lift table
To Next Page
Loading...
Need help?
General
