Add-On Devices
Connecting External Devices
Reference Guide 49
Removing a PC Card
CAUTION
Before removing a PC Card, you must use the Eject Hardware or Safely
Remove Hardware icon in the taskbar, or shut down the notebook. Otherwise,
you could lose data.
1. Before removing the card, select the Eject Hardware or Safely Remove
Hardware icon in the taskbar, then select the card you want to remove.
This protects your data and helps avoid unexpected problems.
If needed, you can restart the card by removing and then reinserting it.
2. Press the eject button to pop the button out, then press it in to eject the PC Card.
Location of PC Card slot varies by model.
Note
Before you connect any device, check its documentation to see if you need to make
any settings or adjustments to the equipment before using it. This might include
setting switches to configure the equipment so that it will operate properly with
your notebook and the software you plan to use.
To Next Page
Loading...
