Getting Started 1-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Jennifer Hale Saved by: Jennifer Hale Saved date: 10/07/98 3:03 PM
Part Number: 387792-001 File name: ch01.doc
Connecting the Computer to AC Power
1 Plug the power cord into the AC Adapter.
2 Plug the AC Adapter cable into the power connector on the
back of the computer.
3 Plug the other end of the power card into an electrical outlet.
NOTE:
In Japan, you must first plug the power cord into the
3-to-2-prong plug adapter included with the computer. Ensure that
the ground wire is connected to a safe earth ground, then plug the
3-to-2-prong plug adapter into the electrical outlet.
!
WARNING:
To reduce the risk of personal injury, electric shock,
fire, or damage to the equipment:
■
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
■
Plug the equipment into a grounded (earthed) electrical outlet
that is easily accessible at all times.
■
Disconnect power from the equipment by unplugging the power
cord from the electrical outlet.
■
Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
To Next Page
Loading...
