Getting Started 1-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Jennifer Hale Saved by: Jennifer Hale Saved date: 10/07/98 3:03 PM
Part Number: 387792-001 File name: ch01.doc
Turning On the Computer
To turn on the computer, slide the power switch and release it.
Setting Up the Software
When you begin software setup, online instructions guide you
through the setup process.
IMPORTANT:
After you begin software setup, you must complete
the entire process, which may require up to 20 minutes. Make sure
the computer is plugged into an external power source for this
process to ensure that software setup is uninterrupted.
CAUTION:
To prevent file corruption and ensure the correct
software drivers are installed:
■
Do not dock the computer in a docking station.
■
Do not turn off or unplug the computer or remove a drive during
software setup.
To Next Page
Loading...
