Compaq Contura 400 - Page 17

Table 1-3. System Unit Module -- Models 420 and 430
===========================================================================
Spare Part
Description Number Notes
===========================================================================
1. Base enclosure 189239-001 Includes:
a. PC Card eject levers, pin, door,
and spring
b. battery latch button and spring
c. handle bracket, screws and
washers
d. battery shield, insulator
e. tilt foot and screws
f. warning label *
g. anti-skid pads *
h. memory door *
---------------------------------------------------------------------------
2. System board Includes PC Card ejector rails,
- 486 DX4/75 MHz 189115-001 hard drive insulators, and gasket
4MB
- 486 DX4/75 MHz 189116-001
8MB
- 486 DX4/100 MHz 189134-001
8MB