Computer Setup (F10) Utility Guide www.hp.com 5
Computer Setup (F10) Utility
File (continued) Apply Defaults and Exit Applies the currently selected default settings
and clears any established passwords.
Ignore Changes
and Exit
Exits Computer Setup without applying or
saving any changes.
Save Changes and Exit Saves changes to system configuration or
default settings and exits Computer Setup.
Storage Device Configuration Lists all installed BIOS-controlled storage
devices.
When a device is selected, detailed
information and options are displayed.
The following options may be presented.
Diskette Type
Identifies the highest capacity media type
accepted by the diskette drive.
Legacy Diskette Drives
Options are 3.5" 1.44 MB and
5.25" 1.2 MB.
Drive Emulation
Allows you to select a drive emulation type for
a certain storage device. (For example, a Zip
drive can be made bootable by selecting
diskette emulation.)
Drive Type Emulation Options
ATAPI Zip drive None (treated as Other).
Diskette (treated as
diskette drive).
IDE Hard Disk None (treated as Other)
Disk (treated as hard
drive)
Computer Setup (Continued)
Heading Option Description
ā
Support for specific Computer Setup options may vary depending on the hardware
configuration.