Getting Started 16
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
Adjusting the Projected Image
There are three ways to adjust the projected image:
n Adjusting the projector height
n Adjusting the projector focus
n Adjusting the projector zoom
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the projector
approximately 1 inch (2.54 cm). To adjust the height:
1. Ensure the foot is turned 90° to balance the projector.
2. Raise the projector to the desired display angle, then press the
elevator button ➊ to release the elevator foot ➋.
To Next Page
Loading...
