What to do if my Compaq MV 540 says 'No Signal'?
If your Compaq Monitor displays 'No Signal', it means the monitor signal cable isn't connected to the computer. To resolve this, connect the 15-pin monitor signal cable to the computer, ensuring that the computer is powered on.
How to fix a blank screen on my Compaq MV 540?
If your Compaq Monitor screen is blank, there might be several reasons. Ensure the power cord is connected and the power switch is turned on. Check that the signal cable is properly connected. It's also possible a screen blanking utility is active; try pressing any key on the keyboard or moving the mouse.
How to fix blurred or dark image on Compaq Monitor?
If the image on your Compaq Monitor appears blurred, indistinct, or too dark, the brightness and contrast levels may be too low. Press the button to access the On-Screen Display (OSD), then select the brightness and/or contrast icon to adjust to the desired levels.
How do I center the image on my Compaq Monitor?
If the image on your Compaq Monitor is not centered, the horizontal or vertical position needs adjustment. Press the button to access the OSD, then select H. Position to adjust the horizontal position or V. Position to adjust the vertical position.
How to adjust image size on Compaq MV 540?
If the image on your Compaq Monitor is too large or too small, the horizontal width or vertical height may need adjustment. Press the button to access the OSD, then select H. Size to adjust the horizontal width or V. Size to adjust the vertical height.
Why is there no sound from my Compaq MV 540 Monitor speakers?
If there is no sound from the speakers of your Compaq Monitor, first ensure the speaker audio plug is securely connected to the back of your computer, specifically to the lime green connector. Also, check if the mute button on your keyboard is activated. If so, press it to deactivate mute, or click the speaker icon on your Windows desktop and deselect 'Mute'.
What does 'Out of Range' mean on my Compaq MV 540 Monitor?
If your Compaq Monitor displays 'Out of Range', it means the video resolution and/or refresh rate are set higher than what your monitor supports. Restart your computer and press F6 before Microsoft Windows loads to enter Safe Mode. Change your settings to a supported setting (see “Specifications”). Then, restart your computer for the new settings to take effect.
Why is the color abnormal on my Compaq MV 540?
If the color on your Compaq Monitor is abnormal, a magnetic object might be nearby. Try moving the object farther away. Also, if the monitor has been moved or bumped, press the button to access the OSD, then select Degauss to activate.
What to do if Compaq MV 540 speakers have no power?
If there is no speaker power for your Compaq Monitor speakers, check all speaker power connections to ensure they are properly connected. Also, verify that the power button on the right side of the right speaker is on; the power button should illuminate when it is on.
Provides instructions for attaching the monitor's base pedestal.
Step-by-step instructions for connecting monitor and speaker cables.
Describes the functions of the monitor's front panel buttons and indicator LEDs.
Guide on how to access and navigate the monitor's On-Screen Display menu.
Explains the 'NO SIGNAL' message and provides troubleshooting steps.
General| Screen Size | 15 inches |
|---|---|
| Maximum Resolution | 1024 x 768 |
| Refresh Rate | 75 Hz |
| Aspect Ratio | 4:3 |
| Display Type | CRT |
| Viewable Size | 13.8 inches |
| Dot Pitch | 0.28 mm |
| Horizontal Refresh Rate | 30 - 54 kHz |
| Vertical Refresh Rate | 50 - 120 Hz |
| Display Colors | 16.7 million |
| Input Connectors | VGA |
To Next Page
