Selecting power conservation settings
To set the computer to conserve power:
● Select a short wait for the screen saver and select a screen saver with minimal graphics and
motion.
To access screen saver settings:
Select Start > Control Panel > Appearance and Themes > Choose a screen saver.
● Select a Power Scheme with low power-use settings. For more information, refer to "
Setting or
changing a power scheme."
Storing a battery pack
WARNING! To avoid potential safety issues, use only the battery pack provided with the
computer, a replacement battery pack provided by HP, or a compatible battery pack
purchased as an accessory from HP.
CAUTION To prevent damage to a battery pack, do not expose it to high temperatures for
extended periods of time.
If a computer will be unused and disconnected from external power for more than 2 weeks, remove
the battery pack and store it separately.
To prolong the charge of a stored battery pack, place it in a cool, dry place.
Calibrate a battery pack before using it if it has been stored for one month or more.
Disposing of a used battery pack
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a
battery pack; short the external contacts on a battery pack; or dispose of a battery pack in fire
or water. Do not expose a battery pack to temperatures above 60˚C (140˚F).
Refer to the Regulatory, Safety, and Environmental Notices for battery disposal information.
48 Chapter 3 Power ENWW
To Next Page
Loading...
