QuickSpecs
Compaq
S920 CRT Monitor
DA-10969 North America — Version 03 — October 23, 2001
2
S
PECIFICATIONS
(continued)
User Controls Brightness, Contrast Yes
Size and Positioning Yes
Pincushion (barrel) Yes
Trapezoid Yes
Tilt (rotation) Yes
Color temperature Yes
Parallelogram) No
Pincushion Balance No
Individual Color Control Yes
Moiré Cancellation Yes
Convergence No
Overscan No
Serial Number Display No
Power Saver on/off No
Display Mode Yes
Degauss Yes
Factory Reset Yes
Intelligent Manageability AssetControl Yes
Note: When used with Compaq Intelligent Manageability CPUs and appropriate network software.
Pixel Clock Speed 202.5 MHz
Input Impedance 75 Ohms
Horizontal Frequency 30 to 95 kHz
Vertical Frequency 50 to 160 Hz
Power Supply ALS 90 to 127 & 195 to 265 VAC; 47.5 to 63 Hz Universal Auto-Sensing
Maximum Power Rating 130 Watts
er Consumption (Suspend/Sleep) < 10W/< 5W
Synch Input TTL separate synch
Signal Cable 15-pin miniature D-sub
Dimensions (H x W x D) 50 x 45 x 45 cm (19.7 x 17.7 x 17.7 in)
Weight 19.8 kg (43.4 lbs)
Operating Humidity (non-condensing) 20% to 80%
Operating Temperature 10°to 40°C (50°to 104°F)
48-Hour Direct Replacement If for any reason this monitor fails during the parts warranty, Compaq guarantees that a new or like-new
monitor replacement will be in the hands of the user within 48 hours.
(Certain restrictions and exclusions apply. Consult the Compaq Customer Service Support Center for
details.)
Warranty Three-year; First year, parts, labor, and on-site repair, Second and Third years, parts only
(Certain restrictions and exclusions apply. Consult the Compaq Customer Service Support Center for
details.)