2 Modem Command Guidelines
Modem Command Guidelines
Accessing HyperTerminal
Modem commands can be entered in HyperTerminal, which is
included with all Microsoft Windows operating systems.
To access HyperTerminal, select Start > All Programs >
Accessories > Communications > HyperTerminal.
Selecting a Command Set
Command sets are modem-specific. To use modem commands
successfully, you must use the command set supported by the
modem in your tablet PC.
Identifying Your Modem
To display the model name of the Lucent/Agere modem in your
tablet PC:
1. Select Start.
2. Right-click My Computer > Properties > Hardware tab >
Device Manager button.
3. Double-click Modems. (An icon and name for your modem
is displayed.)
4. Double-click the modem name icon. (The modem model
name is displayed.)
Accessing Your Command Set
A complete command set for your modem is provided on this CD
in the Lucent/Agere Command Set guide.
To obtain updated information about the Lucent/Agere command
set from the Internet, visit:
http://www.agere.com
291715-001.book Page 2 Thursday, July 18, 2002 3:03 PM
To Next Page
Loading...