Why my COMPASS HEALTH TENS 7000 unit cannot power on?
If your COMPASS HEALTH Medical Equipment unit doesn't power on, it's likely that the battery is exhausted. To resolve this, charge the device.
General| Type | TENS Unit |
|---|---|
| Channels | Dual |
| Power Source | 9V Battery |
| Intensity Levels | Adjustable |
| Wave Form | Asymmetrical Biphasic |
| Pulse Rate | 2-150 Hz, Adjustable |
| Modes | Burst, Modulation |
| Battery | 9V |
| Pulse Amplitude | 0-100mA (peak to peak into 500 ohm load) Adjustable |
Guidance on applying and using electrodes, including contraindications and skin irritation.
Covers intended operator, long-term effects, skin application, pain management, specific conditions, and device handling.
Covers panel cover, safety warnings, and connecting lead wires for device operation.
Detailed steps for setting Pulse Width, Pulse Rate, Ramp Time, ON/OFF Time, and Timer for TENS and EMS modes.
Guidance on connecting electrodes to lead wires and proper placement on the treatment area.
Steps to select a channel, increase output strength, and begin stimulation comfortably.
To Next Page
