E
16
item 01 901
2. Blow into the breath inhaler for 3-5 seconds with normal power
after a deep inhalation..
3. Read the test result from the alcohol tester LCD.
4. The "Caution" symbol is displayed if the alcohol concentration is
the level:
• 0.02% BAC (or 0.2g/l) to 0.05% BAC (or 0.5g/l)
• 0.05% BAC (or 0.5g/l) to 0.08% BAC (or 0.8g/l)
5. The "Danger" symbol is displayed with beep audible alert if the
alcohol concentration is the level:
= > 0,05% BAC (or 0,5g/l).
6. If no blow into the breath inhaler at the test mode, the LCD will
display "0.000 %BAC & 0.0g/l” value.
Note To obtain more accurate result, manufacturer recommend you
to check repeatedly 2 or 3 times.
Auto power off
After the result be display for about 10 seconds, the “OFF” symbol
will appear for 2-3 seconds and the alcohol tester be turned off.
Replace battery
LCD screen flashes for low power, please replace the alkaline batte-
ries.
To Next Page
Loading...
