E
18
item 01 901
Specifications
Sensor semiconductor oxide alcohol sensor
Range 0.00%-0.19% BAC (0.0-1.9g/l)
Accuracy: 0.01% BAC (0.1g/l)
Power input 2x 1,5 V AAA battery (not included)
Operating time warm up: 10s, response: <5s
Clock accuracy +/- 2.0 seconds/day
Auto power off 1 minute approx
Model 01 901
Precaution
• When after drinking, it is recommended to last after 20 minutes, it
is because 20 minutes is approximately for alcohol to be absor-
bed into blood from the digestive organs, and residual alcohol
remaining in the mouth takes this long to dissipate.
• For accurate result, do not repeat next testing within 3 minutes
after last time.
• Do not smoke and eat for 20 minutes prior testing.
• Do not use chemicals to clean the tester directly.
• Do not blowing liquid into the breath pipe.
• Do not use any excitant substances near the tester, such as
paint, insecticides, alcohol.
• Do not place the tester in the closed environment with contami-
nated air.
• Modifying or tampering with the unit' s internal components may
cause a malfunction.
Regardless of whether the product is used, manu-
facturers and vendors will not bear any responsibi-
lity for the violations. For example: drunk driving
and high-altitude operations.
Each person reacts differently to alcohol, so the
test results are for reference only, which cannot
serve as the criteria in determining the outcome.
To Next Page
Loading...
