Need help?Do you have a question about the Compass Challenger X-100 and is the answer not in the manual?
Procedures for maintaining the detector, especially in harsh conditions like salt water beaches.
Guidance on obtaining factory service and returning the detector for repairs.
Details on the use, charging, and memory effects of rechargeable batteries.
How to check the detector's battery condition using the meter.
Explanation of the meter's functions for target identification and depth reading.
Procedure to assess ground mineralization level in TR-DISC mode.
Guidance on how to interpret target responses by burying test objects.
Explanation of the alert signal for target overload and how to manage it.
Function of the toggle switch for accepting or rejecting targets based on notch settings.
Control for broadening or narrowing the notch filter's target rejection range.
Step-by-step guide to setting the ground balance control for accurate detection.
Initial setup steps for bench testing, including target preparation and control settings.
Testing target responses, power level, and tone controls in the ALL-METAL mode.
Testing the target meter's functionality and response to different targets.
Procedures for bench testing the GB-DISC mode, requiring motion for target detection.
Procedures for bench testing the TR-DISC mode, which does not require motion.
Testing the TARGET TONE ID mode, which requires motion and is sensitive to mineralization.
Factors such as detector quality, operator skill, target mass, and ground mineralization affecting depth.
Information on conductive properties required for targets and the detector's ability to find small items.
Procedures for maintaining the detector, especially in harsh conditions like salt water beaches.
Guidance on obtaining factory service and returning the detector for repairs.
Details on the use, charging, and memory effects of rechargeable batteries.
How to check the detector's battery condition using the meter.
Explanation of the meter's functions for target identification and depth reading.
Procedure to assess ground mineralization level in TR-DISC mode.
Guidance on how to interpret target responses by burying test objects.
Explanation of the alert signal for target overload and how to manage it.
Function of the toggle switch for accepting or rejecting targets based on notch settings.
Control for broadening or narrowing the notch filter's target rejection range.
Step-by-step guide to setting the ground balance control for accurate detection.
Initial setup steps for bench testing, including target preparation and control settings.
Testing target responses, power level, and tone controls in the ALL-METAL mode.
Testing the target meter's functionality and response to different targets.
Procedures for bench testing the GB-DISC mode, requiring motion for target detection.
Procedures for bench testing the TR-DISC mode, which does not require motion.
Testing the TARGET TONE ID mode, which requires motion and is sensitive to mineralization.
Factors such as detector quality, operator skill, target mass, and ground mineralization affecting depth.
Information on conductive properties required for targets and the detector's ability to find small items.
General| Brand | Compass |
|---|---|
| Model | Challenger X-100 |
| Category | Metal Detector |
| Language | English |
To Next Page