E
16
item 01 900
Exhale Test
1. The “Blow” symbol is displayed when warm-up is succeed, and
the 10 to 00 countdown is started that indicate the tester is in
testing mode.
2. To perform the Test, the person should take a deep inhale(brea-
th), then, exhale with some strength by mouth into the breath
inhaler for about 4-5 seconds without interruption.
3. Read the test result from the alcohol tester LCD.
4. The “Caution” symbol is displayed if the alcohol concentration is
the level:
0.02% BAC (or 0.2g/l) to 0.05% BAC (or 0.5g/l)
5. The “Danger” symbol is displayed with beep audible alert if the
alcohol concentration is the level:
Over & equal 0.05% BAC (or 0.5g/l)
6. If no blow into the breath inhaler at the test mode, the LCD will
display “0.00 %BAC & 0.0g/l” value.
To Next Page
Loading...
