E
18
item 01 900
Specifications
Sensor semiconductor oxide alcohol sensor
Range 0.00%-0.19% BAC (0.0-1.9g/l)
Power input: 2×1.5V AAA battery (not included)
Operating time warm up: 10s, response: <5s
Model 01 900
Precaution
• When after drinking, it is recommended to last after 20 minutes, it
is because 20 minutes is approximately for alcohol to be absor-
bed into blood from the digestive organs, and residual alcohol
remaining in the mouth takes this long to dissipate.
• For accurate result, do not repeat next testing within 3 minutes
after last time.
• Do not smoke and eat for 20 minutes prior testing.
• Do not use chemicals to clean the tester directly.
• Do not use any excitant substances near the tester, such as
paint, insecticides, alcohol.
• Do not place the tester in the closed environment with contami-
nated air.
• Modifying or tampering with the unit’s internal components may
cause a malfunction.
• Each individual’s body responds differently to alcohol. A person
may become legally impaired to drive at a point below the legal
blood alcohol limit.
The result of this alcohol gives BAC for reference
only, manufacturer does not to take any legal
responsibility.
To Next Page
Loading...
