Need help?Do you have a question about the Compit SOLARCOMP 911 and is the answer not in the manual?
General| Input Voltage | 12V/24V Auto |
|---|---|
| Display | LCD |
| Output Voltage | 12V/24V |
| Protection | Overcharge, Over-discharge, Short circuit, Reverse polarity, Overload |
| Operating Temperature | -20°C to +50°C |
Displays current system variant and measured panel temperature.
Steps for physically attaching the controller to the wall and connecting components.
Controls the pump based on temperature difference for loading the tank.
Configuration options for DHW tank temperature and pump control.
Controls the pump based on temperature difference for loading the tank.
Configuration options for DHW tank temperature and pump control.
Controls the pump based on temperature difference for loading the tank.
Manages the operation of an auxiliary heating coil for the tank.
Configuration options for DHW tank temperature and pump control.
Controls the pump based on temperature difference for loading the tank.
Manages discharging excess heat from the tank.
Configuration options for DHW tank temperature and pump control.
Controls the pump based on temperature difference for loading the tank.
Manages heat transfer to a second tank based on temperature differences.
To Next Page
