Need help?Do you have a question about the Compo Closet CUDDY and is the answer not in the manual?
General| Brand | Compo Closet |
|---|---|
| Model | CUDDY |
| Category | Toilets |
| Language | English |
Ensuring comfort with CUDDY's 12V power requirements before installation.
CUDDY is water resistant but not waterproof; avoid prolonged exposure to wetness.
Warning regarding chemicals in CUDDY's internal components causing harm.
Warnings about sunlight, pinch hazards, and hot objects for safe CUDDY use.
Safety during maintenance, cleaning, and general usage to prevent damage or injury.
Guidelines for waste composting, including maturation times and disposal.
Unpack the unit, locate carbon filter, check for obstructions.
Remove solids bin, unlock by extending handle and rotating 180 degrees.
Add carbon-rich material or compostable bag to the solids bin base.
Connect the 12V power cable to a fused power supply.
Insert the male connector into the power connection at the rear.
Check for airflow to confirm the fan is working correctly.
Insert a 9V battery and check the LED liquid-full indicator light.
Press the carbon filter onto the circular fitting to secure it.
Replace the solids bin, orienting agitator legs downwards for CUDDY.
Wipe down the unit, lower the lid, and it's ready for use.
Quick guide to using CUDDY: Sit down, close plates for #1, open for #2.
CUDDY's seat diverts liquids; close plates when urinating to minimize solids chamber liquid.
Rotate knob to open plates; mix solids with agitator after use; add aggregate for CUDDY Lite.
Empty urine tank when LED indicator turns on; pour slowly to avoid splashback.
List of tools and materials needed for securing the CUDDY unit in place.
Step-by-step guide to securely fasten the CUDDY to a surface.
List of tools and materials needed for converting LED light to 12V power.
Step-by-step guide to convert LED light power from 9V to 12V.
List of tools and materials needed for external venting setup.
Step-by-step guide to configure CUDDY for external air venting.
List of tools and materials needed for the drain-away kit installation.
Step-by-step guide for installing the drain-away kit for urine container.
List of tools and materials needed for cleaning the CUDDY unit.
Step-by-step guide for cleaning the CUDDY inside and out.
Activated Carbon pellets are required for refilling the filter.
Step-by-step guide to remove old carbon and refill the filter.
List of tools and materials needed for replacing the silicone valve.
Step-by-step guide to remove old valve and install a new one.
If solids bin is too dry, add water and mix to prevent smell.
If solids bin is too moist, add extra cover material and mix.
Condensation inside unit is normal; use absorbent material to manage excess moisture.
Address fruit flies by checking vent hose filter or adding Diatomaceous Earth.
Check power supply, connections, and debris blockage for fan operation.
Check for obstructions under bin or hydrated coco coir blocking agitator.
Check for small parts or coco coir under the bin or between bin/drive shaft.
Check circuit board for damage or moisture; try reversing power supply polarity.
Check power supply, battery, and spring contacts for LED indicator function.
Try reversing power supply polarity; check fan operation for 12V setup.
Warranty does not cover defects from normal wear, misuse, or unauthorized parts.
Compo Closet Ltd. is not responsible for incidental or consequential damages.
To Next Page
