Need help?Do you have a question about the Composite-ARF IMPACT F3A-type and is the answer not in the manual?
General| Brand | Composite-ARF |
|---|---|
| Model | IMPACT F3A-type |
| Category | Toy |
| Language | English |
Disclaimer regarding builder/operator responsibility and liability limits.
Essential safety guidelines for pre-flight checks and initial flights.
Details the construction and composition of the aircraft's main components.
Advice on handling and transporting the composite aircraft to prevent damage.
Explains the painting process, seams, and potential flaws in the finish.
Lists necessary tools for building the aircraft.
Lists suitable glues and epoxies for composite construction.
Introduces the IMPACT model and its target audience.
Provides essential advice for a smooth and successful build process.
Step-by-step guide for fitting the engine cowling.
Instructions for installing the main landing gear.
Guidance on attaching and securing the aircraft canopy.
Critical steps for ensuring correct wing and stab angles for flight.
Procedures for setting precise wing and stab incidences.
Details on installing the horizontal stabilisers and control horns.
Instructions for installing aileron servos and horns on the wings.
Steps for mounting and hinging the rudder.
Guidelines for installing glow or gas engines.
Instructions for mounting the tuned exhaust pipe.
Advice on positioning fuel tanks, receivers, and batteries for CG.
Placement advice for ignition units and batteries.
Recommendations for protecting wood parts from fuel.
Information on electric motor and battery installations.
Details for installing the Hacker C50 geared electric motor.
Details for installing the Plettenberg Xtra 25-13 electric motor.
How to install and secure flight batteries.
Importance of adequate cooling for motor, battery, and ESC.
Safe practices for handling and connecting LiPo batteries.
How to set and adjust the aircraft's centre of gravity for initial flights.
Setting the correct engine downthrust and sidethrust angles.
Recommended control throws for elevator, rudder, and ailerons.
Lists all main items and hardware included in the kit.
List of wooden components included in the kit.
Optional parts and upgrades available for the aircraft.
To Next Page