This document provides assembly instructions and safety warnings for a Twin House Loft Bed, identified by model number WF285733.
Function Description:
The Twin House Loft Bed is a multi-functional furniture piece designed to provide a sleeping area elevated above the floor, creating usable space underneath. The "house" design element adds a decorative and playful aesthetic, making it suitable for children's rooms. The loft bed structure includes a bed frame, guardrails, and a ladder for access to the upper bunk. The design appears to be a single loft bed, not a bunk bed with two stacked sleeping surfaces, but rather a raised bed with open space below. The assembly instructions show two distinct bed frames, suggesting that the product might be available in different configurations or that the diagrams illustrate different stages or perspectives of assembly for a single unit. The presence of guardrails on both long sides of the upper bunk is a key safety feature, as is the integrated ladder for safe ingress and egress.
Important Technical Specifications:
- Mattress Size: The bed is designed for mattresses that are 74"-75" long and 37 1/2" - 38 1/2" wide.
- Mattress Thickness: The mattress thickness should not exceed 6 inches.
- Guardrail Height: The top surface of the mattress must be at least 5 inches (127mm) below the upper edge of the guardrail to prevent falls.
- Hardware: The assembly requires various screws and connectors, including:
- A (Ø4x25): 28 pieces
- B (Ø4x30): 3 pieces
- C (6.5x100): 18 pieces
- D (6.5x80): 14 pieces
- E (6.5x60): 10 pieces
- F (6.5x50): 4 pieces
- G (1/4x75): 8 pieces
- H (1/4x35): 4 pieces
- I (Ø10x40): 60 pieces (bushings/dowels)
- J (4x58): 1 piece (Allen wrench)
- Parts List: The bed comprises numerous components, including:
- Cross bars (top, bottom, back, front, front side, back side)
- Guard rail supports (left, right, top & bottom, back)
- Legs (front, right, back)
- Stair components (left/right stair side, step stair side, step bars)
- Slats (14 pieces)
- Middle & bottom bars
- Botom bars
- Top & bottom back bar
- Front side rails
- Back side rails
- Left guard rails support
- Right guard rails support
- Top & bottom guard rails support
- Back guard rails support
- Front top cross bar
- Back top cross bar
- Middle & bottom bars
- Bottom bars
- Left front leg
- Right front leg
- Left back leg
- Right back leg
- Left stair side or left stair side
- Right stair side or left stair side
- Step stair side
- Slats
Usage Features:
- Age Restriction: Not suitable for children under 6 years of age to use the upper bunk.
- Access: A ladder is provided and must always be used for entering and leaving the upper bunk.
- Occupancy: Prohibit more than one person on the upper bunk at any time.
- Placement: If placed next to a wall, the full-length guardrail should be positioned against the wall to prevent entrapment.
- Mattress Type: The use of water or sleep flotation mattresses is prohibited.
- Safety Precautions: A night-light may be used for added safety.
- Prohibited Activities: Do not allow horseplay on or under the beds, and prohibit jumping on the bed.
- Attachments: STRANGULATION HAZARD: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed.
Maintenance Features:
- Regular Checks: Periodically check and ensure that the guardrail, ladder, and all other components are in their proper position, free from damage, and that all connectors are tight.
- Replacement Parts: Do not use substitute parts. Replacement parts, including additional guardrails, can be obtained from COMPTREE INC. dealers.
- Assembly Recommendations:
- Assemble the loft bed on the shipping carton to protect the floor or carpet.
- Ensure all staples are removed from the box before beginning assembly.
- When attaching bed slats, do not lock the screws to the outermost edge; leave a certain space at the edges to prevent the board from breaking.
- Documentation: Keep the assembly instructions for future reference.
Need help?
General
To Next Page