76
Compulite
Chapter 4
To set time-in and time-out
Example: Set time-in to 5 and time-out to 10.
(QLIST #), CUE #, TIME, 5, / (slash), 10, STORE
(QLIST #), CUE #, TIME, 5, / (slash), 10, ENTER
To set delay-in and delay-out
Example: Set delay-in to 3 and delay-out to 5.
(QLIST #), CUE #, TIME, DELAY-IN, 3, / (slash), 5, STORE
(QLIST #), CUE #, TIME, DELAY-IN, 3, / (slash), 5, ENTER
To set a follow on cue
Example: The fade to cue 3 automatically begins when cue 2
completes its fade.
(QLIST #), CUE 2, TIME, WAIT, FOLLOW-ON, STORE
(QLIST #), CUE 2, TIME, WAIT, FOLLOW-ON, ENTER
Note: The follow-on setting, which begins an automatic fade to cue 3,
is set in cue 2.
To set a counted wait time
Example: Set a wait time of 3 seconds for cue 5. The fade from cue 5
to cue 6 will be automatic.
CUE 5, TIME, WAIT, 3, STORE.
CUE 5, TIME, WAIT, 3, ENTER.
Cue 6 automatically becomes a follow-on cue. When cue 5 starts there is 3
second wait and cue 6 begins its fade.
To Next Page
Loading...