Compumedics Somfit Quick Start Guide

Defining Sleep Signals
®
®
Start Here
Download
Somt® APP
Quick Start Guide
BEFORE USE
!
Important
Step
Step 2.
Indicator Light
Ready to record
APPLY SOMFIT®
Contents
x1
Somt® Device
x1
Charging Cradle
x1
USB Cable
x1
Power Adaptor
x 1
Electrode
x 1
®
SKIN
PREP PAD
www.somt.com
Install App and follow your Somt® Providers
instructions to login.
Charge the Somfit® – prior to using, insert
Somfit® into the USB charging cradle provided.
Charging
Flashing blue light
Blue light on
Fully charged
Attach the Somfit® device to the electrode
ensuring all 3 snap-ins are in place.
Single green light
blinking every
10 seconds
Slowly remove the clear backing from the electrode to
reveal the adhesive area. Minimise touching the adhesive
area and avoid any finger contact with the three circular
gel areas of the electrode.
While looking at a mirror, apply
the electrode to the centre
of the forehead approximately
one finger’s width above
the eyebrows.
Place the centre part of the
electrode on the skin first and
firmly press on the Somfit.
While pressing on the device,
slowly run your fingers along
the electrode from the centre
towards the two ends to
ensure firm placement.
BACK
Peel Slowly
FRONT
Indicator Light
PREPARE FOREHEAD
Step 1.
Wash forehead using water
only
without soap or cleansing
products. Dry with towel.
Clean your forehead area
with the Skin Prep Pad for
at least
15 seconds to give
the best signal quality.
Dry your forehead with a clean
towel, to ensure the forehead is
fully dry before applying the electrode.

Compumedics Somfit Specifications

General

Brand	Compumedics
Model	Somfit
Category	GPS
Language	English