Page
Cubic Inch Displacement, Values Known.
This program computes the displacement of an engine. Values considered are bore, stroke, and
number of cylinders.
Press ALT, ENGINE FORMULAS, then select C.I.D. Menu, then Calc C.I.D. to start this
program.
Display Example:
== Calc C.I.D. ==
Bore? 4.250 (Enter cylinder bore diameter inches)
Stroke? 3.750 (Enter crankshaft stroke inches)
No. Cyl? 8 (Enter number of cylinders)
C.I.D.= 425.6 (Calculated engine cubic inch displacement)
Liters= 6.97 (Calculated engine displacement CC/1000)
Cubic Inch Displacement, Find Cylinder Bore.
This program computes the cylinder bore diameter required to obtain a desired engine
displacement.
Press ALT, ENGINE FORMULAS, then select C.I.D. Menu, then select Calc Bore to start this
program.
Display Example:
== Calc Bore ==
C.I.D.? 358.0 (Enter desired engine cubic inch displacement)
Stroke? 3.480 (Enter crankshaft stroke inches)
No. Cyl? 8 (Enter number of cylinders)
Bore= 4.046 (Calculated cylinder bore diameter inches)
Cubic Inch Displacement, Find Crankshaft Stroke.
This program computes the crankshaft stroke length required to obtain a desired engine
displacement.
Press ALT, ENGINE FORMULAS, then select C.I.D. Menu, then select Calc Stroke to start this
program.
Display Example:
== Calc Bore ==
To Next Page