EasyManua.ls Logo

Conair GS23 User Manual

Conair GS23
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start Guide for Assembly & Use of Your Fabric Steamer
fabric steamer
DUAL HEAT
with
STEAMING TIPS & HINTS
Before using your steamer, please
carefully read the instruction booklet
provided.
During use, always hold the T-nozzle ½"
(13mm) from the fabric you are steaming.
CAUTION/STOP
!
Always test fabric to be steamed for
color fastness in an inconspicuous spot.
If you see a color change or color
transferring to the T-nozzle from your
fabric, STOP steaming immediately!
This item must be dry cleaned only!
!
When steaming drapes or curtains,
rst wash and dry according to care
instructions and fabric type, then rehang
and steam.
!
Do not steam clothes while wearing
them.
!
Do not use hot water to ll the tank.
Do not overll.
!
Do not place garment or item on wire
hanger. Use plastic hanger or hang from
shower rod for easy steaming.
Parts in Box:
Steamer
Brush
CreaserWater Tank Soft Cushion
Brush
Effective on all types
of fabrics, linens & drapes
gs23x_13pa143391_quickstart_guide_comp.indd 1 5/22/13 3:48 PM

Other manuals for Conair GS23

Question and Answer IconNeed help?

Do you have a question about the Conair GS23 and is the answer not in the manual?

Conair GS23 Specifications

General IconGeneral
Cord length2.7 m
Product colorBlue, White

Summary

Parts in Box Overview

Steaming Tips and Safety Cautions

General Steaming Tips

Hold T-nozzle 13mm from fabric. Read instruction booklet before use. Test fabric for color fastness.

Operational and Safety Warnings

Stop steaming if color transfers. Dry clean if item is dry cleaned only. Wash drapes before steaming.

Fabric Steamer Operation

Getting Started and Warm-up

Plug in unit, wait for red power light and green ready light. Test on old cloth first.

Steam Control and Settings

Use trigger for steam. Switch for continuous steam. Use sliding switch for high/low settings on fabric.

Filling the Water Reservoir

Unplug unit. Remove reservoir, open inlet cover, fill with tap water, secure reservoir.

Adding Attachments

Take attachment out of box and snap onto the top portion of the steamer.

Related product manuals