EasyManuals Logo

Conair Quick Gems HJ7 User Manual

Conair Quick Gems HJ7
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Do not move the Quick Gems™ unit until jewel is secured onto hair section.
Release the ON button when the jewel snaps into place. Jewel cartridge automatically moves
to the next jewel.
Jewels can be reused. Simply remove from hair and reload into cartridge.
TO REMOVE THE JEWELS FROM YOUR HAIR
1. Grasp both sides of the jewel and gently pull the two sides of the jewel apart, releasing
spring tension slowly.
2. Slide the jewel down and o the strands of hair. Be careful not to stretch the spring
between the jewels.
HOW TO RELOAD THE JEWELS INTO THE CARTRIDGE
1. Open the protective cover over the jewel cartridge and slide each jewel into an empty slot in
the cartridge.
2. Close the protective cover.
HOW TO ALTERNATE CARTRIDGES
1. Open the protective cover over the jewel cartridge.
2. Remove disk from the Quick Gems™ styling tool and snap desired disk into place.
Close protective cover before use.
NOTE: Jewels supplied in this unit are specifically designed for use with this product.
Do not use jewels other than those supplied, as they can cause the Quick Gems™ unit to jam.
CHOOSING SPECIFIC JEWELS
If you want to apply only one or two specific jewels to your hair, you can rotate the cartridge
clockwise until the desired jewel is directly under the jewel transfer slot.
Visit www.conair.com for English and Spanish Quick Start Guides and Instruction Booklets.
22PA084807 Model HJ7 – All Versions

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Conair Quick Gems HJ7 and is the answer not in the manual?

Conair Quick Gems HJ7 Specifications

General IconGeneral
BrandConair
ModelQuick Gems HJ7
CategoryPersonal Care Products
LanguageEnglish

Related product manuals