Conair TrueBlend TB900-6 User Manual

www.conairnet.com
USER GUIDE
UGB011-0207
TrueBlend
™
Gravimetric Blender
Software Version V2.7
USER INSTRUCTIONS • About this operating manual • Warranty and liability • Layout of the manual • Meaning of safety
information Display conventions • Pictograms for safety and information Abbreviations • SAFETY • General • Designated
use • Sources of danger • Safety devices • Warning symbols on the unit • Information for the operator • Information for
operating and maintenance personnel • TECHNICAL SPECIFICATIONS • Manufacturer • Specifications • TRANSPORT AND
SETUP • Unpacking • Lifting • Setup • Positioning controller • Making connections • Stowing discharge chute
STRUCTURE AND FUNCTION • Structure of the unit • Brief description of the functional units • Layout of the material
hoppers • Operating modes • Gravimetric mode • Volumetric mode • Combined mode • COMMISSIONING • OPERATION
Switching on • Menu structure • Navigation • Starting and stopping the metering and mixing process • Switching off
Logging in/logging out • Commissioning • Mixing process • Component setup • GRAVICOLOR Setup • Working with recipes
Changing material for a component (also valid for all other components) • Checking total throughout • Creating reports
Corporate Office: 412.312.6000 | Instant Access 24/7 (Parts and Service): 800.458.1960 | Parts and Services: 814.437.6861
WARNING - Reliance on this Manual Could Result in Severe Bodily Injury or Death!
This manual is out-of-date and is provided only for its technical information, data and capacities. Portions of this manual
detailing procedures or precautions in the operation, inspection, maintenance and repair of the product forming the subject
matter of this manual may be inadequate, inaccurate, and/or incomplete and cannot be used, followed, or relied upon.
Contact Conair at info@conairgroup.com or 1-800-654-6661 for more current information, warnings, and materials about
more recent product manuals containing warnings, information, precautions, and procedures that may be more adequate
than those contained in this out-of-date manual.

Conair TrueBlend TB900-6 Specifications

General

Brand	Conair
Model	TrueBlend TB900-6
Category	Blender
Language	English

Summary

1.0 User instructions

1.3 Meaning of safety information

Explains safety symbols, signal words, and their importance.

2.0 Safety

2.2 Safety Hazards

Identifies specific hazards associated with the unit's components like mix blades and valves.

2.3 Safety Features

Describes built-in safety features such as interlock switches and guards.

2.4 Designated use

2.5 Sources of danger

Details the primary sources of danger and potential hazards on the unit.

2.6 Safety devices

Lists and explains the function of various safety devices protecting the operator.

2.8 Information for the operator

Outlines operator responsibilities, qualifications, and general safety guidelines.

4.0 Transport and setup

4.3 Setup

4.5 Making connections

5.0 Structure and function

5.2 Brief description of the functional units

5.4 Operating modes

Explains the different operational modes available on the TrueBlend blender.

6.0 Start-up

7.7 Start-up

Procedures for initial startup and system checks of the TrueBlend blender.

7.0 Operation

7.1 Switching on

7.4 Starting and stopping the blending process

Procedures for initiating and terminating the blending cycle on the TrueBlend.

7.7.2 Calibrating

Instructions for calibrating the load cells and material throughput of the TrueBlend.

7.8 Blending process

Explains the core process of blending materials with the TrueBlend unit.

7.9 Component setup

Details how to configure material components and their percentages for batching.

7.10 TrueBlend Setup

7.11 Working with recipes

7.14 Creating reports

7.15 System setup

7.18 Maintenance

8.0 Alarm messages and troubleshooting

8.1 Signaling alarm message

Explains how alarm messages are displayed and their behavior.

8.2 Handling alarm messages

8.4 Alarm messages and correction

Lists common alarm messages, their possible causes, and solutions.

8.5 Troubleshooting/Mechanics

Addresses mechanical issues, like material flowing out of the weigh bin.

8.6 Diagnostic Overview Screens

9.0 Maintenance and repair

9.1 Safety

Emphasizes safety precautions and personnel qualifications for maintenance tasks.

9.6 Repair work

9.6.3 Load Cell Removal and Installation for Trueblend models, TB045 and TB100

9.6.5 Replacing controller