Caution! Format the microSD before use. Doing this,
however, will remove all data from the card. Make sure to
back up any data before formatting.
(1) Only support a Class 10 microSD card with at least 8GB
capacity for recording.
(2) Do not remove the microSD card during operation. It will
damage both the memory card and camera.
(3) Push the microSD card into the memory card, slot gently
until it clicks into place. The card only fits one way, so do
not force the card into the port.
(4) To remove the microSD card, make sure the camera is
OFF. Press down on the microSD card and it will pop up,
you can then pull it out easily.
Please connect the camera to your PC and then turn on the
camera. After a few seconds the microSD card will be shown
as a removable disk.
Before Using Your Conbrov HD088 Camera
9